Description
The Fluke differential pressure modules are for measuring those low differential pressures, as found in clean rooms and the like. Each module has two pressure ports. Some can only be used on clean dry gases. Others can be used on liquids.
Each Differential module can be supplied with an IANZ endorsed calibration certificate if required.
Also check out the Ralston fittings. A great way to connect up these modules to your pressure source.
These modules can be connected up to a variety of Fluke meters, and it doesn’t matter which one as the module holds all the calibration data.
We at CPS can calibrate and adjust any Fluke pressure module. Can be used with the Fluke 789, 725, 787, 725, 718 and more, click on the process calibration link above and have a look at the range of process calibrators and process meters that can be used with the Fluke modules.
Please click on the options drop down box above to see the pressure ranges available.
Product code: Fluke 700DPM
Additional information
Options Available | -1 to +1 PSID / -7 to + 7 kPa, -5 to +5 PSID / -35 to 35 kPa, 0-1 inh20D (Gases only) / 0.25 kPa, 0-1 PSID (Gases only) / 7 kPa, 0-1 PSID (Liquids Ok) / 7 kPa, 0-10 inh20D (Gases only) / 2.5 kPa, 0-15 PSID (Gases Only) / 100 kPa, 0-15 PSID (Liquids Ok) / 100 kPa, 0-5 PSID (Gases Only) / 35 kPa, 0-5 PSID (Liquids Ok) / 35 kPa, 15 to + 15 PSID / -100 to 100 kPa |
---|
Reviews
There are no reviews yet.